Pitney Bowes DM475 - Manual (Page 186)

12-20
12 • Maintenance
SV62261 Rev. F
Cleaning the Feeder Exit Sensor (DM475)
The feeder exit sensor will require cleaning periodically. Lift the cover
on the feeder/WOW and locate the sensor (see fi gures below). Use a
cotton-tipped swab to clean both the top and bottom surfaces/holes.
Cleaning the under side of the top
section of feeder exit sensor Cleaning the bottom section of
feeder exit sensor (the swab must
go inside the hole for proper
cleaning)