Pitney Bowes DM475 - Manual (Page 181)

12-15
12 • Maintenance
SV62261 Rev. F
2. Remove the stripper blade/brush assembly by pressing on the
light blue lever/button and sliding the assembly straight out to-
wards you.
Stripper Blade/
Brush Assembly
Lever
3. Clean the brush by running the it under plain water. Blot the ex-
cess water from the brush after rinsing it.
i
NOTE: Replace the brush if it cannot be cleaned thoroughly.
4. If you need to clean the wick and shield, continue with Cleaning
the Shield and Wick (DM400c) later in this chapter.
5. Slide the assembly back onto the machine. You should hear a
click as it engages. Close cover.
Maintaining the Moistener
1
2
Cleaning the Stripper Blade/Brush Assembly (DM400c)
1. Open cover.