Pitney Bowes DM475 - Manual (Page 107)

7-9
7 • System Options
SV62261 Rev. F
Enabling, Changing or Disabling Lock Codes and Passwords
Enabling the Lock Code
The Lock Code prevents unauthorized access to your mail ing system
after the machine has entered sleep mode.
1. Press
Menu .
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5 Select "Enable Lock Code".
5. Enter the new 4-digit Lock Code and select "Accept".
6. Re-enter the new Lock Code again to confirm and select "Ac-
cept".
7. At the "Lock Code Enabled" message, select "OK".
Change Lock Code
Enter New Lock Code
***_
◄ Accept
Disabling the Lock Code
You can disable the Lock Code if it has been enabled.
1. Press
Menu .
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Disable Lock Code".
6. When prompted, enter the current Lock Code and select "Ac-
cept".
Basic Options