Pitney Bowes DM475 - Manual (Page 109)

7-11
7 • System Options
SV62261 Rev. F
Disabling the Supervisor Password
You can disable the Supervisor Password if it has been enabled.
1. Press
Menu .
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Disable Password".
6. When prompted, enter the current Supervisor Password and
select "Accept".
i NOTE: If the Supervisor password is disabled, the refill password
is also disabled automatically.
Changing the Supervisor Password
You can change the Supervisor Password if it has been enabled.
1. Press
Menu .
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Change Password".
6. When prompted, enter the current Supervisor Password and
select "Accept".
7. Enter the new Supervisor Password, and select "Accept".
8. Re-enter the new password to confirm and select "Accept".
9. At the "Password Enabled" message, select "OK".
Basic Options
Enabling, Changing or Disabling Lock Codes/Passwords (cont'd)