beautypg.com

Appendix k: photograph caption of the camera refit – FeiYu Tech FY-Panda2 Autopilot User Manual

Page 66

background image

Guilin Feiyu Electronic Technology Co., Ltd.

Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]

Page 63

mode)

‖. RC receiver connect to Remote Adapter, the Panda Ⅱ will detect the

communication automatically when in flying, if the communication is interrupt by 5

seconds continuous, the PandaⅡ autopilot will switch into RTL "Return to Launch "

working mode automatically.

Appendix K: Photograph Caption Of The Camera Refit

The P1 port on the autopilot module is the photograph controlling interface. It can

output a camera shutter triggered signals, this signal is TTL level (0-3V), if you take

photos by small camera like Canon S100V, the camera need to be refit to release the

remote cord then connect to the P1 port ,the camera can be control by PandaⅡ autopilot

now. This pictures will show the refitting of Canon S100V: