FeiYu Tech FY-Panda2 Autopilot - Manual (Page 48)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 45
15.2.3 Route Planning By Mouse Click In 3D View
After initialized altitude. Input the altitude in parameter edit box, click on ―Set‖ button
to confirm the setting. Click on the ‖Start‖ button, the mouse change into gripper type,
press on the ―Ctrl‖ button on the keyboard, mouse click on the target point on the map to
set the corresponding navigation point. Loosen the "Ctrl" button, click on the
―End‖ button
to finish route planning (It will display the distance of each route and the total distance ).
The checking of the information please refer to the method which introduce in the
“Regional Auto Route Planning”. After checked, please save the information of the
route in page ―Route‖ in the tool bar, otherwise information of the ruto will be lost after
power outage.
16. Checking And Suggestion For Fly
Step A: Check whether the connection of the aircraft is normal, whether the antenna
place well (If fly for photograph, please check the camera carefully ,whether the
power is enough, whether the storage card is clear and the parameters are
setting normally).
Step B: Check the center of the gravity of the aircraft and the batteries. If the power of