FeiYu Tech FY-Panda2 Autopilot - Manual (Page 33)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 30
 After set up the parameter please click on “ Set ” button to confirm the setting.
Step Six: Gyro and airspeed sensor Initialization
Gyro Initialization: Please keep the Panda
Ⅱ static the click on the ―Initialize the
gyro‖ button to reset the gyro. It‘s better to do the gyro reset before each flight.
Airspeed sensor initialization: Keep the aircraft static, you can use your hand to
cover the port of the airspeed, and do not let the wind interfere with the airspeed sensor,
then click the button ―Initialize the airspeed‖. After that please check whether the
airspeed showing on GCS is in the vicinity of 0-3.Due to the sensor error, there are some
tiny airspeed value on the ground is normal.