Automatic take off parameters setting, Process of automatic take off – FeiYu Tech FY-Panda2 Autopilot User Manual
Page 36
Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 33
autopilot will control the aircraft with maximum gradually.
14.3.2 Automatic Take Off Parameters Setting
Take Off Pitch:
The minimum climbing angle in auto take off process.
Default value is 15
°.
Take Off Throttle:
The maximum throttle quantity in the auto take off process.
Default value is 95%.
Automatic take-off is not suitable for all model aircraft, it's more suitable for hand
throwing or catapult-assisted take-off. Make Hand throwing as an example, after set up
the parameters of automatic take-off and prepare well for throwing, click on
―A Takeoff‖
button, throwing the aircraft, then wait for the take off process finish automatically.
14.3.3 Process Of Automatic Take Off
Figure Track Of Automatic Take-Off
Two phases about automatic take off
Phase One: When the aircraft motion is detected, the autopilot will control the aircraft
with the parameter of the
“TakeOff Pitch” to climb to the target altitude (80 meters),
under some certain condition, the autopilot will increase a suitable pitch angle for comfort
Auto Take-Off End Point
Home Point
Auto Take-Off Start Point