FeiYu Tech FY-Panda2 Autopilot - Manual (Page 55)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 52
Param1 ” page in the tool bar to save the setting.
Appendix B: Adjust The Center Of Gravity
Lift the aircraft at the design COG (center of gravity) point. It is OK if the aircraft can
satisfy the conditions: maintain balance at rolling and the head or tail slowly title to one
side. Please fix the batteries and the other equipment well after finish the adjustment.
Appendix C: Flight Area Map Making
( 1 ) Confirm the network is available, start the GCS software, click the
―3D‖ button on
the GCS switch to 3D view. Hidden the toolbar, make the GCS software to maximize
window.
( 2 ) Set up the screenshot resolution before making map. The default setting is ―High‖.
Suggest that use the default setting.
( 3 ) Selecting region for screenshot.
Fine the desired region on Google earth, press the “Alt” on the keyboard, mouse
will change into gripper type, click the first and the last point of the region, the GCS
software will generate the screenshot region automatically.