FeiYu Tech FY-Panda2 Autopilot - Manual (Page 21)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 18
11. Parameter Setting Software (GCS)——USB
Driver And GCS Software installation
Step A : Please visit the official website: www.feiyu-tech.com . Download the correct
USB driver, GCS installation program and the Google Earth plug-in 6.1 or
above version then unzip the RAR file.
Step B : Install the USB driver according to the guide.
Step C : After successfully install the USB driver, insert the USB-TTL interface cable
into computer USB COM port(don‘t connect TTL port to any other device ) , the system
will correctly identify the USB -TTL data cable, then you will find there is a new port
add(COM and LPT) . ― Silicon Labs CP210x USB to UART Bridge (COM3) ‖.The ―COM*‖ is
what the connection need (e.g. COM3).
If the COM number is more than COM10, please modify to the available port which
lees than COM10 (Skill of modification please refer to the Appendix F ).
Step D : Install the GCS software according to the guide (Please install with the default
path).
Step E : Install the Google Earth plug-in 6.1.
 The USB driver and the GCS software can be support the operation systems:
Windows XP, Windows 7, Windows 8, Windows 8.1, Windows Vista
 Please run the GCS software as administrator when work with the Windows 7,
Windows 8, Windows 8.1, Windows Vista operation system. Steps for how to
run the GCS as administrator please refer to the Appendix