FeiYu Tech FY-Panda2 Autopilot - Manual (Page 32)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 29
Step Five: The cruise speed and circle radius setting
Target Speed Setting: This is the expectation speed when the Panda
Ⅱ flight in the
navigation working mode(Default setting is 68.4Km/h). The flight speed is very important,
please don ‘t optional setting. The speed have to make the aircraft keep normal flight. We
suggest not increase the speed too high, it may cause very unusual flying behavior and
may result in damage of your aircraft due to excessive throttling.
You can observe the "GPS Speed" on GCS software when in flight, and to evaluate
the aircraft's cruising speed.
Circle Radius: It means the radius of the hovering flight. We suggest that the circle
radius should be set up to more than 2 times of the flight speed. Such as the speed of the
aircraft in 70km/h ,the circle radius suggest that set in 140 meters .If the circle radius is
set too small , hovering flight may not be able to normal ,the plane will decrease flight
altitude, even cause the dangerous of air crash.