FeiYu Tech FY-Panda2 Autopilot - Manual (Page 54)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 51
7. Up/Down Data Frequency
" Teleme Rate " Refers to the autopilot data downlink frequency. Because the limit of the
data radio performance, please set up the "Teleme Rate" to 1HZ.
" RC Rate " means the remote control frequency when using the Remote Adaptor.
Because the limit of the data radio performance, please set up the "RC Rate" to 10 HZ. If
the frequency is set too high, it will obstruct the communication of the data radio and can
not communicate at all.
 After finish the throttle setting, please click the “ Save ” button in” Param1”
page in the tool bar to save the setting.
8. Connection Option And Control Mode Setting
If the Panda
Ⅱ autopilot system connection in accordance with the ―OPTION 1
( “RC” control mode )” please set up the control mode as ―RC‖ through GCS software. If
connection in accordance with the
―OPTION 2 (“DRRC” control mode )” please set up
the control mode as ―RC‖ through GCS software.
 After finish the control mode setting, please click the “ Save ” button in”