Eurocom T210C Convertible - Manual (Page 68)

Using The Computer
2 - 26 Configuring the Infrared Transceiver
2
Configuring the Infrared Transceiver
To configure the computer’s settings for Fast Infrared (FIR) communication
follow these steps:
1. Click Start, point to Settings (or just click Start and click Control Panel)
and click Control Panel.
2. Double-click Wireless Link (in the Printers and Other Hardware
Category) icon.
3. Click Hardware (tab), and then click Properties (button).
4. Select Advanced (tab).
5. Select “Infrared Transceiver A” and change the Value to “IBM 31T1100”.
6. Click OK > OK.
The settings for the infrared transceiver may also be configured in the BIOS
(see
“COM Ports (Components Menu)” on page 5 - 13 ).
For further information, please refer to the manual of the device you wish to
connect.
Infrared
Communication
The infrared transceiv-
er operates on a “Line
of Sight”.
Make sure nothing is
blocking the “Line of
Sight” between your
system’s transceiver
and the destination’s
transceiver.