3xLOGIC VIGIL Server - Manual (Page 78)

Motion Recording Settings
When recording in Motion mode, click the Motion Settings… button to access the Motion Settings window. Here you con-
figure which regions of the video image are to be used for motion detection. To do this, simply draw on the video. A
semi-transparent overlay will be drawn over the video; this marks the motion detection region. To clear a motion detec-
tion region, click and draw on it.
Invert Swaps masked and clear regions.
Clear Clears all masked regions.
Set All Masks the entire image.
Test Motion
When latched on, the preview window will display motion detection blocks and their real-time motion
values overlaid on masked regions of the video. When motion is detected based on the sensitivity, values
are highlighted in yellow with red text.
Note: The Trigger Blocks setting does not affect the motion
test; the Test Motion feature is designed to test the motion
sensitivity only.
Trigger Blocks
Determines how many motion blocks must meet the motion sensitivity requirement to trigger motion
recording.
Motion Sensitivity
Adjust the Motion Sensitivity slider to control the amount of motion required to trigger recording. Use a
very sensitive setting to detect almost all motion, or a less sensitive setting to require only very large
movements to trigger recording.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 74