3xLOGIC VIGIL Server - Manual (Page 103)

Kinect Settings
When using a Microsoft Kinect™ Device for Video Analytics, the Calibration options are different and will only appear
when a Kinect™ is installed and has been assigned to a specific channel.
Tilt Angle The Kinect™ Sensor is motorized, you can adjust the angle that the head is pointed with the slider.
Detection Method
Overhead Depth
Detection
Use this mode when the Kinect™ Sensor is mounted on the ceiling pointed down. The
Kinect™ can only operate between a certain height range (7.5 feet to 16.3 feet from
the floor). Setting the height of the Sensor allows the engine to estimate a person's
physical dimensions.
Skeleton Detec-
tion
Use this mode to utilize the Kinect™ Sensors ability to detect a person via extrap-
olating their skeleton. Near mode will allow the Kinect™ Sensor to detect as close as
16 inches. Tracking mode can be toggled between Default (Full Body) and Seated
(Shoulders only) detection modes.
Note: Kinect settings are available for configuration through both the Calibration and the Add Rule processes.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 99