3xLOGIC VIGIL Server User Manual

Page 156

Text mode
Original mode

Output Relay Settings

Select Outputs from the top of the Relays/Alarm tab page.

Select an Output number from the drop-down. Select Edit... to configure Output settings.

Configure Mode and Dwell time under the Settings section and assing the output to a camera via the Cameras list.

Relay Override

This logical function is used to override a relay when another relay is in use. This will cause a relay which would nor-
mally trigger to remain inactive when another specific relay has already been tripped.

3xLOGIC's VIGIL Server 7.1 User Guide

Pg. 152