3xLOGIC VIGIL Server - Manual (Page 165)

16 Settings - Audio Tab
The Audio tab allows users to add Audio Channels and Audio Talk Devices to VIGIL Server and configure how they are
recorded.
Audio Recording Device Settings
Audio Recording Device settings are used to configure Audio Sources to be recorded on the VIGIL Server. These can be
IP Cameras, IP Audio Devices, Capture Card Inputs or VIGIL Server Sound Card Inputs.
Note: Capture card inputs and VIGIL Server
audio inputs only require configuration of the
Channel Name and Compression. The form will
change to reflect this when either of these types
is selected in the Device Drop-Down menu.
Channel Name
Enter a name for the audio channel. This can
be used to describe the location of the audio
source.
Device
Select the type of audio device. IP Audio from
a supported IP Camera, Capture card inputs
or VIGIL Server audio inputs.
Use settings from
camera
Enable to use settings from a currently
connected IP camera. Some cameras require
this option to be used or no audio will record.
Type Select the type of IP camera.
Address The IP address of the IP camera.
Port The Port used on the IP camera.
URL The camera URL for certain camera types.
User Name / Pass-
word
The user name and password for the IP cam-
era.
Timeout
The period of time in seconds before a dis-
connection is determined to have occurred.
Compression
Select PCM for no compression, or High for a
compression ratio of 16 to 1.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 161