Cisco VPN 3002 - Manual (Page 52)

3-6
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 3 Interfaces
Configuration | Interfaces | Public
Configuration | Interfaces | Public
This screen lets you select a connection method—DHCP, PPPoE, or static IP addressing—for the public
interface. It also allows you to disable the public interface.
Figure 3-3 Configuration | Interfaces | Public Screen
Disabled
To make the interface offline, click Disabled. This state lets you retain or change its configuration
parameters.
DHCP Client
click this radio button if you want to obtain the IP address and subnet mask for this interface via DHCP.
If you click this button, you do not make entries in the IP address and subnet mask parameters that
follow.
PPPoE Client
click this radio button if you want to connect using PPPoE. If you select PPPoE, you do not make entries
in the static IP addressing parameters that follow.