Interface, Physical address, Ip address – Cisco VPN 3002 User Manual
Page 240: Mapping type, Action/delete
13-52
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 13 Monitoring
Monitoring | Statistics | MIB-II | ARP Table
Interface
The VPN 3002 network interface on which this mapping applies:
•
Private Interface
•
Public Interface
Physical Address
The hardwired MAC (Media Access Control) address of a physical network interface card, in 6-byte
hexadecimal notation, that maps to the IP Address. Exceptions are:
•
00 = a virtual address for a tunnel.
•
FF.FF.FF.FF.FF.FF = a network broadcast address.
IP Address
The IP address that maps to the Physical Address.
Mapping Type
The type of mapping:
•
Other = none of the following.
•
Invalid = an invalid mapping.
•
Dynamic = a learned mapping.
•
Static = a static mapping on the VPN 3002.
Action/Delete
To remove a dynamic, or learned, mapping from the table, click Delete. There is no confirmation or
undo. The Manager deletes the entry and refreshes the screen.
To delete an entry, you must have the administrator privilege to Modify Config under General Access
Rights. See Administration | Access Rights | Administrators.
You cannot delete static mappings.