Cisco VPN 3002 - Manual (Page 111)

9-15
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 9 Events
Configuration | System | Events | Syslog Servers
Syslog Servers
The Syslog Servers list shows the UNIX syslog servers that have been configured as recipients of event
messages. You can configure a maximum of five syslog servers. If no syslog servers have been
configured, the list shows --Empty--.
Add/Modify/Delete
To configure a new syslog server, click Add. See Configuration | System | Events | Syslog Servers | Add.
To modify a syslog server that has been configured, select the server from the list and click Modify. See
Configuration | System | Events | Syslog Servers | Modify.
To remove a syslog server that has been configured, select the server from the list and click Delete. There
is no confirmation or undo. The Manager refreshes the screen and shows the remaining entries in the list.
Reminder:
The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager
window.