Cisco VPN 3002 - Manual (Page 253)

14-7
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 14 Using the Command-Line Interface
Menu Reference
Menu Reference
This section shows all the menus in the first three levels below the main menu. (There are many
additional menus below the third level; and within the first three levels, there are some non-menu
parameter settings. To keep this chapter at a reasonable size, we show only the menus here.)
The numbers in each heading are the keyboard shortcut to reach that menu from the main menu. For
example, entering
1.3.1 at the main menu prompt takes you to the Configuration > System
Management> IP Routing menu.
Note The menus and options, and thus the keyboard shortcuts, might change with new software versions.
Please check familiar shortcuts carefully when using a new release.
Main Menu
1) Configuration
2) Administration
3) Monitoring
4) Save changes to Config file
5) Help Information
6) Exit
Main -> _
1 Configuration
1) Quick Configuration
2) Interface Configuration
3) System Management
4) Policy Management
5) Back
Config -> _
1.1 Configuration > Quick Configuration
See the VPN 3002 Hardware Client Getting Started guide for complete information about Quick
Configuration.
1.2 Configuration > Interface Configuration
This table shows current IP addresses.
..
1) Configure the Private Interface
2) Configure the Public Interface
3) Back
Interfaces -> _