Cisco VPN 3002 - Manual (Page 218)

13-30
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 13 Monitoring
Monitoring | Statistics | DHCP
Monitoring | Statistics | DHCP
This screen shows statistics for DHCP (Dynamic Host Configuration Protocol) server activity on the
VPN 3002 since it was last booted or reset. Each row of the table shows data for each IP address handed
out to a DHCP client (PC) on the VPN 3002 private network.
To configure the DHCP server, see Configuration | System | IP Routing | DHCP.
Figure 13-14 Monitoring | Statistics | DHCP Screen
Reset
To reset, or start anew, the screen contents, click Reset. The system temporarily resets a counter for the
chosen statistics without affecting the operation of the device. You can then view statistical information
without affecting the actual current values of the counters or other management sessions. The function
is like that of a vehicle’s trip odometer, versus the regular odometer.
Restore
To restore the screen contents to their actual statistical values, click Restore. This icon displays only if you
previously clicked the Reset icon.
Refresh
To update the screen and its data, click Refresh . The date and time indicate when the screen was last
updated.
Active Leases
The number of DHCP leases currently active.
Maximum Active Leases
The maximum number of DHCP leases simultaneously active at any one time.