Configuration | interfaces | private, Disabled, Static ip addressing – Cisco VPN 3002 User Manual

Page 50: Ip address

3-4

VPN 3002 Hardware Client Reference

OL-1893-01

Chapter 3 Interfaces

Configuration | Interfaces | Private

This screen lets you configure parameters for the private interface. It displays the current parameters, if
any.

Figure 3-2

Configuration | Interfaces | Private Screen

Caution

If you modify any parameters of the private interface that you are currently using to connect to the
VPN 3002, you will break the connection, and you will have to restart the Manager from the login
screen.

Disabled

To make the interface offline, click Disabled. This state lets you retain or change its configuration
parameters.

If the interface is configured but disabled (offline), the appropriate Ethernet Link Status LED blinks
green on the VPN 3002 front panel.

Static IP Addressing

To change the IP address of the private interface, click Static IP Addressing.

IP Address

Enter the IP address for this interface, using dotted decimal notation (for example, 192.168.12.34). Note
that 0.0.0.0 is not allowed. Be sure no other device is using this address on the network.