Comtrol ES7510 - Manual (Page 87)

RocketLinx ES7510 User Guide: 2000544 Rev. B VLAN Configuration - 87
Configuration Using the Web Interface
The following figure shows a static VLAN configuration table. The new VLAN 3 was created and the VLAN
name is test. Egress rules of the ports are not configured.
This figure displays how to configure the
Egress rule of the ports.
Use the following steps to configure Egress
rules:
1. Select the VLAN ID. The entry of the selected VLAN turns to light blue.
2. Assign Egress rule of the ports to U or T.
3. Press Apply to apply the setting.
If you want to remove one VLAN, select the VLAN entry and then click the Remove button.