Feature overview – Comtrol ES7510 User Manual
Page 28
28 - Feature Overview
RocketLinx ES7510 User Guide: 2000544 Rev. B
Configuration Using the Web User Interface
The Welcome page of the web management interface then appears.
5.
If you have not done so, you can change the ES7510 IP address to meet your network environment.
a.
Double-click Basic Setting.
b.
Click IP Configuration.
To use static addressing, enter a valid IP address, subnet mask and default gateway.
To use DHCP, click Enable in the DHCP Client drop list.
c.
Click Apply.
6.
If you are planning on connecting PDs, configure the PoE port characteristics, see
You can use the
on Page 28 to locate other features that you may want to configure.
Feature Overview
The following table provides detailed information about ES7510 features and provides the location of the
configuration information in the web user interface.
Type
Category
Details
802.1x Port-Based
Network Access
Control
Configuration
•
System Authentication Control - Enable/Disable
•
Authentication Method - RADIUS or Local
•
RADIUS Server - IP Address, Shared Key, Server Port,
and Accounting Port
•
Local RADIUS User - User Name, Password, and VID
•
Secondary RADIUS Server - IP Address, Shared Key,
Server Port, and Accounting Port
•
Local RADIUS User List