Comtrol ES7510 - Manual (Page 19)

RocketLinx ES7510 User Guide: 2000544 Rev. B Creating a Backup Configuration File - 19
Initial Configuration Using NetVision
Creating a Backup Configuration File
You can use NetVision to save the current configuration stored in the ES7510 flash using a Windows XP
system.
Note: For operating systems newer than Windows XP, use TFTP with the web user interface ( Backup the
Configuration - TFTP Server Method on Page 51) or the CLI ( Backup and Restore on Page 140).
The configuration file can be reloaded on the ES7510 or used load the same settings onto another ES7510.
The ES7510configuration file is a standard text file. You can open the file with Word or Notepad. You can also
modify the file, add/remove the configuration settings, and then restore the file back to the ES7510.
1. Highlight the ES7510 for which you want to create a backup file.
2. Right-click and select Backup.
3. Click the Browse button and navigate to the location where you want to
save the configuration file.
4. Enter the backup file name and click Open.