Introduction – Comtrol ES7510 User Manual
Page 7
RocketLinx ES7510 User Guide: 2000544 Rev. B
Introduction - 7
Introduction
The ES7510 is an industrial ten port managed PoE Plus switch that provides:
•
Eight 10/100BASE-TX PoE Plus ports that are IEEE 802.3af (15.4W) and IEEE 802.3at (30W) compliant
with a forced powering feature to support non-standard Power Devices (PDs)
•
Two Gigabit (10/100/1000BASE-TX) uplink ports
The ES7510 meets the high power and advanced management needs of critical PoE applications such as real-
time IP video surveillance and wireless communication utilizing Wimax and IEEE 802.11 a/b/g/n access
points. Featuring a rugged design for harsh environments, web user interface, Command Line Interface (CLI),
SNMP management options, power scheduling, and eight fully compliant IEEE 802.3at PoE injector ports, the
ES7510 is easily configured to deliver up to 30W for even the most power intensive devices such as IP cameras
utilizing heaters and pan/tilt/zoom controls.
In addition to functioning as a PoE power source, the ES7510 includes features to enhance device control,
ensuring that power consumption does not exceed parameters that you define. This includes power budget
control functions to limit power output on devices not reporting correct consumption rates and device priority
options to guarantee power to critical devices while avoiding power supply overloads.
The ES7510 is equipped with full Layer 2+ management capabilities to provide the most flexible network
configuration and control. Features like Link Aggregation Control Protocol (LACP) allow grouping of multiple
ports to enhance bandwidth and provide load balancing while port-based VLAN with tunneling, QoS, IGMP
Snooping, and Rate Control features enable optimum control over network environments. In addition to the
full array of management capabilities, the ES7510 also supports security features that protect the network
and guarantee secure, reliable data transmission. Fault relay and email notification of event alarms, DHCP
supporting IP and MAC binding, IEEE 802.1x Access Control, SSH, and many other controls are included to
make secure administration and management a simple task.
The ES7510 provides features needed for network control and security in an industrial network environment.
Refer to the
section on
or th
for information regarding features.