Comtrol ES7510 - Manual (Page 121)

RocketLinx ES7510 User Guide: 2000544 Rev. B Device Front Panel - 121
Configuration Using the Web Interface
Device Front Panel
The Device Front Panel allows you to see the LED status of the ES7510.
Note: There is not a CLI command for this feature. If you can view the physical LEDs, you can use the LED
Descriptions on Page 13, which provide detailed LED information.
LED
Name
LED Lit LED Blinking LED Off
Power System power is ready Power not available Power off
Sys System ready
System is uploading
firmware or the system is
rebooting
System not ready
Ring
Green: Working as ring
master
Amber: Ring failed
Black: Ring function is
disabled or the ES7510 is on a
ring but not the ring master
Alarm
Green: Alarm relay
activated
Not available Alarm not activated
LINK/ACT Port link is up Port is transmitting Port link is down
PoE
Ports 1-8
Green: IEEE 802.3af
(15.4W) forwarding
Looking for a device
Power output over current, a
cable short, or PoE is disabled
for this port
Blue: IEEE 802.3at (30W)
forwarding
Looking for a device
Power output over current, a
cable short, or PoE is disabled
for this port
Ports 9-10 Port link is up Port is transmitting Port link is down