Comtrol ES7510 - Manual (Page 111)

RocketLinx ES7510 User Guide: 2000544 Rev. B Event Selection - 111
Configuration Using the Web Interface
Event Selection
Event Types can be divided into three basic groups: System Events, PoE Events, and Port Events. System
Events are related to the overall function of the switch, whereas Port Events are related to the activity of
specific ports.
System Event Warning is sent when….
Device Cold Start Power is cut off and then reconnected.
Device Warm Start Reboot the device by CLI or web user interface.
Authentication failure An incorrect password or SNMP Community String is entered.
Time Synchronize
Failure
Accessing the NTP Server is failing.
Power 1 Failure PW1 power failure.
Power 2 Failure PW2 power failure.
Fault Relay TheFault Relay is on.
DI1 Change The Digital Input#1 status has changed.
Ring Event A ring event has occurred.
Loop Protection A loop protection event has occurred.
Port Event Warning is sent when…..
Link-Up The port is connected to another device.
Link-Down
The port is disconnected. For example, the cable is pulled out or the opposing
devices is down.
Both The link status changed.