Comtrol ES7510 - Manual (Page 17)

RocketLinx ES7510 User Guide: 2000544 Rev. B NetVision Overview - 17
Initial Configuration Using NetVision
Optionally, highlight a RocketLinxor multiple RocketLinx switches, right-click, and use the pop-up menu.
Menu Option Description
File
Discovery Locates all RocketLinx managed switches on the network interface.
LED Signal
Turns on or off the LEDs on a RocketLinx so that you can locate a
specific RocketLinx without verifying the IP or MAC addresses.
Open Web User
Interface
Opens the web user interface for configuration automatically.
Reboot Device
Reboots the RocketLinx. You can shift-click to reboot multiple
RocketLinx switches.
Load Factory
Defaults
Reloads the factory defaults, including, the IP address and subnet
mask.
See Factory Defaults on Page 57 to reload the factory defaults without
resetting the IP address and subnet mask.
Preference
Sets the Discovery option for manual update (click the Discovery
button) or automatically update every xx seconds.
Exit Exits NetVision.
IP Setting
Modify IP
Executes the IP address or netmask changes on the RocketLinx. See
Programming Network Information on Page 18 for more information.
Auto-Assign IP Assigns a range of IP addresses to multiple RocketLinx switches.
Configurati
on File
Backup Creates a backup file for the specified RocketLinx switch.
Restore Restores from a selected backup file.
Load Default Restores the RocketLinx with the default configuration file.
Firmware Upgrade
Uploads the firmware that you have selected. The latest firmware file
is available on the
Comtrol FTP site . New firmware versions may
include bug fixes or new features.
Boot Loader Upgrade
Uploads the Bootloader file that you have selected. The latest
Bootloader file is available on the
Comtrol FTP site . A new Bootloader
version may include bug fixes or new features.
Log
Show Panel Opens a window in the bottom of the NetVision pane.
Log Window Opens a separate window that you can save, if necessary.
Diagnose
SFP Check Verifies SFP operation.
Self Test
Performs a self test RocketLinx. You can review the results in the log
file.