Comtrol ES7510 - Manual (Page 21)

RocketLinx ES7510 User Guide: 2000544 Rev. B Upgrading Firmware - 21
Initial Configuration Using NetVision
3. Highlight the appropriate backup file, and
click Open.
4. Click the Restore button.
5. Click the Ok button to the Success message.
Upgrading Firmware
There are several methods that you can use to upload the latest firmware into the ES7510. Optionally, you
can use the web user interface (
Firmware Upgrade on Page 55) or the CLI ( Firmware Upgrade on Page 141).
Use this procedure to upload the latest ES7510 firmware into the RocketLinx using NetVision.
1. Locate and download the firmware by selecting the Software page that corresponds to your RocketLinx
switch by accessing the
Comtrol FTP site .
2. Highlight the ES7510 (or several ES7510 switches) and note the firmware version.
3. Right-click and select Firmware Upgrade.
4. Browse to the location of the firmware file, select the file, and click
Upgrade.
Status first displays Firmware uploading and then displays
Firmware Burning in the Status field.
5. Verify that when the Status field is empty, that the version
number matches the new version number.
6. Click Discovery to update the display.