Comtrol ES7510 - Manual (Page 24)

24 - Web User Interface RocketLinx ES7510 User Guide: 2000544 Rev. B
Configuration Using the Web User Interface
Web User Interface
The ES7510 web management page was developed with Java. You can use any standard web browser, which
is compatible with Java Runtime to configure and communicate with the ES7510 from anywhere on the
network.
If you did not program the IP address for your network using NetVision ( Programming Network Information
on Page 18), you need to change your computer IP address to 192.168.250.x (Network Mask: 255.255.0.0). The
default IP address for the ES7510 is 192.168.250.250.
1. Open a command prompt window and ping the IP address for the ES7510 to verify a normal response
time.
2. Launch the web browser on the PC using one of these methods:
• Right-click the ES7510 in NetVision and click Open Web GUI.
• Type http://192.168.250.250 (or the IP address of the switch), and then press Enter.
Windows XP - Windows Server 2003
If a Warning - Security message appears, click Always trust content from this publisher and then
Run when requested to run the application (IP address).
Windows Vista - Windows 7
If necessary, click I accept the risk and want to run this application, and then Run if a security
warning popup message appears.