Comtrol ES7510 - Manual (Page 105)

RocketLinx ES7510 User Guide: 2000544 Rev. B 802.1x Configuration - 105
Configuration Using the Web Interface
802.1x Configuration
IEEE 802.1x is the protocol that performs authentication to obtain access to IEEE 802 LANs. It is port-base
network access control. With the function, the ES7510 could control which connection is available or not.
IEEE 802.1x Page
System Auth Control Enable or Disable the IEEE 802.1x authentication.
Authentication
Method
RADIUS is an authentication server that provides a key for authentication. When
you use this method, you must connect the switch to the server. If you select Local
for the authentication method, the switch uses the local user database that can be
created in this page for authentication.
RADIUS Server
RADIUS Server IP The IP address of the RADIUS server.
Shared Key The password used to communicate between the ES7510 and the RADIUS Server.
Server Port The UDP port of the RADIUS server.
Accounting Port The port for packets that contains the account login or logout information.
Secondary RADIUS Server
RADIUS Server IP
You can set a Secondary RADIUS Server, if the primary RADIUS server goes
down.
Shared Key
The password used to communicate between the ES7510 and the secondary
RADIUS Server.
Server Port The UDP port of the secondary RADIUS server.
Accounting Port
The port for packets that contains the account login or logout information for the
secondary server.