Returning to the default settings – Toshiba IK-WB11A User Manual

Page 83

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

0°o

Returning to the Default Settings

Follow the procedure below to return to the default settings.

• Return to the defaults settings by using a thin, pointed object to press the

reset button, shown in the figure on page 14, 15 in Basic User's Guide, for at
least 5 seconds.

■

The settings return to the defaults.

■

The following shows the default settings.

^NOTE

• Pressing the reset button for less than a second switches ON/OFF of the

video output. This function, the video output, is only for checking images on
the screen when installing the camera.

At this moment, the camera stops image recordings and sending images

and sound to the network.

)