5)configure the "attached picture size" setting – Toshiba IK-WB11A User Manual

Page 61

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

2) Enter the Message Body and configure the "Attach

Alarm Picture To Mail" setting

The text entered here becomes the body of messages. To the actual

body of a message, the time/date when the alarm went off and the

camera name are added to the text entered here.

If "ON" is set for "Attach Alarm Picture To Mail," the image saved by the

network camera, when an external alarm was detected, is attached to a
message at the size specified for "Attached Picture Size."

^NOTE

• The attached image data is in a format that ordinary mail client software can

read.

3) Configure the "Conditions for Sending Mail When

Motion Is Detected" setting

■ Set the sending of mail when motion is detected to "ON" or "OFF."

^NOTE

• The default setting is "OFF."

4) Enter the Message Body and configure the "Attach

Motion Picture To Mail" setting

The text entered here becomes the body of messages. To the actual

body of a message, the time/date when a motion was detected and

the camera name are added to the text entered here.
If "ON" is set for "Attach Motion Picture To Mail," the image saved by
the network camera, when motion was detected, is attached to a

message at the size specified for "Attached Picture Size."

^NOTE

• The attached image data is in a format that ordinary mail client software can

read.

5)Configure the "Attached Picture Size" setting

window

® Select an item from the pull-down menu

■ Set the alarm and detected motion image size.

- I

a .

)

-1

№