Toshiba IK-WB11A - Manual (Page 70)

0°o
Setting Items (Cont.)
m 0 )
3"
(D
-1
№
• Frame Rate:
IK-WB11A
Configures the frame rate of the image data sending to the network
(forwarding rate).
HIGH
MIDDLE
LOW : Higher frame rate.
: Standard frame rate.
: Lower frame rate.
Actual frame rate changes depending on image size and setting
environment (use of network cable, performance of a PC, etc—). The
maximum frame rate for HIGH setting are:
30 fps (320 X 240, 160X 1 20)
7.5 fps (1280 X 960, 800 X 600, 640 X 480)
The numbers in parentheses are the sizes of camera images.
^ The frame rate may get lowered when the slow shutter function and
SD memory card are in use.
IK-WB01A
Configures the frame rate of the camera. The bigher the frame rate, the
renewal speed of the single-view or multi-view mode screen becomes
faster.
The lower the frame rate, sensitivity of the camera heightens.
HIGH
MIDDLE
LOW
fps
15 fps
10 fps
5 fps
frame/second
Actual frame rate changes depending on picture size and setting
environment (use of network cable, performance of a PC, etc—). The
maximum frame rate for HIGH setting are:
HIGH : 15fps(320 X 240 ZOOM, 160 x 120 ZOOM)
7.5fps(640 X 480, 320 X 240, 160X 120)
MIDDLE : 10fps(320 X 240 ZOOM, 160X120 ZOOM)
5fps(640 X 480, 320 X 240, 160X 120)
LOW : 5fps(320 X 240 ZOOM, 160x120 ZOOM)
2.5fps(640 X 480, 320 X 240, 160X 120)
The numbers in parentheses are the setting sizes of camera images.
^NOTE
• When using the camera at night, or installing the camera where the
camera cannot get enough light, try setting lower frame rate to
heighten the sensitivity of the camera.(IK-WB01A)
• When monitoring something very bright, like sunlight, you might see
stripe patterns (called "smear") on the screen. If something like this
happens, setting frame rate to "LOW" might help.