Return to frequency display, 3-3. transceiver function on, 3-4. tri-bander – Kenwood TM-741A User Manual
Page 59: Transceiver function off, Press the f key then the band sel key for the band
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When the F key is pressed for longer than 1 second, then
the BAND SEL key for the last frequency band is
pressed, the STOP WATCH will turn on or off.
CiD
more than
1 sec
i c p n
„ „ n n n n
I D L U
u u
U U . U U
-•,23
ummmmlllt
^
j
mmiraiH)
•Return to Frequency Display
Press the F key for longer than 1 second then press the
BAND SEL key for the band.
Each time the F key and then the BAND SEL key for
the last frequency band is pressed the STOP WATCH
will turn on or off.
dJ
\
i c p n „ „ n n n n
I J C U
u u
U U . U U
1.33
mmmmrn
^ j
HlltUllMlII
When the band in which the clock has been programmed
is selected, the display will return to the frequency
display by TX.
•Return to Frequency Display
Press the F key then the BAND SEL key for the band.
5-3-3. Transceiver Function ON
When the F key is pressed, then the BAND SEL key fo
a frequency band is pressed, the calender display will
turn on or off.
d)
i c -
1 C
' ^ u n n n
I D - l b
i
W
t u u u
1.33
w _________
3
1
mniHnlfll
If the clock is displayed while the transceiver is on, no
settings ( such as time change and stopwatch start) can
be made.
5-3-4. Tri-Bander
Tri-bander with an optional BAND UNIT can be also
change to a three simultaneous CLOCK DISPLAY at
the same time.
59