Kenwood TM-741A - Manual (Page 16)

Key Function Refer to
VFO+
Power ON
VFO reset of all bands P.30 4-4-2
VFO-i-BANDSEL
-I- Power ON
VFO reset of a band P.30 4-4-2
MHz+
Power ON
All lock on or off during Lock
P.54 4-14
CALL+
Power ON
Demonstoration mode
on or off
P.40
F+SHIFT+
Power ON
Tone alert selection P.51 4-9
F+TONE+
Power ON
Set the time and date P.55 5-1-2
F+DTSS+
Power ON
With optional DTU-2:
The microphone PF key can
be used to change the beep
tone frequency.
P.66 7-3-1
F-I-LOW +
Power ON
Wide /Narrow selection P.28 4-3-4
4-1-2. Microphone
(2) ®
®d)UP/DWN switches
These switches can be used to increase or
decrease the VFO frequency, the Memory
channel number, and the Tone frequency, etc..
d)PTT (Push to Talk) switch
The transceiver will transmit whenever this
switch is depressed. Scan operations may be
canceled by pressing this switch without
transmitting.
0LOCK switch
This key will deactivate all functions of the
microphone except the PTT function and DTMF
keypad.
(Dl6-Tone DTMF keypad
These buttons are used to activate the DTMF
encoder.
16