14. key locks, 14 keylocks – Kenwood TM-741A User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4-14. KEY LOCKS
There are three types of lock function.
® Microphone key lock
When the switch on the rear
of the microphone is set to the
LOCK position, all the
microphone keys except the
PTT switch are disabled.
LOCK
»LOCK
All the panel keys and the Tuning control are
disabled. However, the microphone keys work.
Press the F key, then press the MHz/LOCK key
within 10 seconds. The LOCK indicator lights.
Ca)
•
n u c ' ^ . u n n n
l u n j I H l . U U U
, . , ,
n n n n LOOK
H ' ^ u u u u
— —
To release the lock, press the F key again, then press
the MHz/LOCK key within 10 seconds.
ALL LOCK
All operations, except the power switch, volume, and
squelch, are disabled.
Switch the power off while the LOCK indicator is on,
hold down the MHz/LOCK key, and switch the power
on again. The A LOCK indicator lights.
---
1 n u C
l u n j I H l . u u u
^ ^ . n n n n
..oc.
H H u . u u u
POWER (c
To release A LOCK, switch the power off while the
A.LOCK indicator is on, press and hold the MHz/LOCK
key, and switch the power on again. The A LOCK
operation cannot be canceled by VFO reset or MR reset.
54