Brother MFC4550 PLUS - Manual (Page 46)

■f III—V
intliiy 1
NOTICE
About the D ocum ents You Send...
Do not U3C documents
that
are cturlcd, wrinkled, folded, ripped, or
that
contain staples, paper clips, paste, or tape. Also, do not use cardboard,
newspaper, or fabric.
Curled
Wrinkled
Folded Staples
Ripped Paper Clip
Tape
The Auto D ocum ent Feeder (AD F)
The Auto Document Feeder (ADF) automatically feeds documents
(up to 30 pages)
into the MFC, one at a time. The thickness and weight of the documents should fall
into the following categories;
Thickness; For one sheet: 2.8 x 10'^ to 4.7 x 10"^ inches (0.07 to 0.12 mm).
For multiple sheets: 2.8 x 10'® to 3.9 x 10'® inches (0.07 to 0.10 mm).
Weight; For one sheet; 0.07 x 10 ^ to 0.121 x 10 ^ Ibs/inch^ (52 to 85 g/m“).
For multiple sheets: 0.07 x 10'^ to 0.114 x 10'^ Ibs/inch^ (52 to 80 g/m^).
As a reference, please note that the paper used for this manual has the following
thickness and weight:
Thickness: 3.1 x 10 ^ inches (0.08 mm)
Weight: 0.091 x 10'® Ibs/inch^ (64 g/m^)
Before inserting documents into the document feeder, fan the sheets of paper to make
sure the documents are not stuck together. Then tap the leading edge on a flat surface
so all the pages are even when placed in the feeder. Make sure you always place the
documents in face down.
3 4