Brother MFC4550 PLUS User Manual
Page 122
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Control Panel Keys
Printer Status
On/OffLine
FF/Cont
Test/Reset
Print Priority
Simultaneous Operation
Your MFC can print data from the PC simultaneously while either sending or
receiving a fax message or scanning into the PC. When your MFC is copying or
receiving a fax on paper, it pauses the PC printing operation until it has finished.
OnlOffLine Key
This key is used to turn the printer on-line (ready to receive PC data) and off-line (not
ready to receive PC data). If you press this key during printing, the MFC immediately
stops printing even if it has already started to print. It ejects the page, and then enters
the offline status. Press
On/OftLine
again and the printer will print the complete
page again.
When the printer is in the online status and the LCD shows ONLINE, you cannot use
FF/Cont
and
Test/Reset
keys.
FFICont Key
The upper switch on the control panel can work as the Form Feed
(FF),
Continue
(CONT) key.
Form Feed
When the LCD shows REMAINED DATA, press On/OffLine to turn the printer
offline, then press
FF/Cont.
The MFC prints any data remaining in the printer
memory.
110