Brother MFC4550 PLUS - Manual (Page 37)

10. Press Set.
11. Select the type of number (FAX, TEL,
F/T, CHAIN) using ^ (left arrow) or
(right arrow) to display the type you want.
(See For Your Information on page 29.)
Example: FAX.
12. Press Set.
13. Return to Step 6 to enter another number,
or press Stop to return to the date and
time.
C
TYPE:FAX
SELECT ^ & SET
TYPE:FAX
SELECT ONE-TOUCH
Helpful Hints If you must wait for a dial tone to access an outside line, or at one or
more points during a long credit card dialing sequence, you can
insert a pause by pressing the Redial/Pause key. When you press
Redial/Pause, a dash will appear on the display. By storing the
numbers with a pause, you can create a delay of 3.5 seconds.
Storing the Speed Dial Numbers
When you store a phone or fax number as a Speed Dial number, you must enter a two-
digit number, from 01 to 36 using the dial pad keys. For example, you can not enter
“5”. You must enter “05”. You can store as many as 36 Speed Dial numbers.
1. Press Function.
2. Wait for two seconds.
3. Press 1.
4. Press 4.
5. Press 2.
25