Brother MFC4550 PLUS - Manual (Page 123)

fisii
NOTE; The MFC periodically will print any data remaining in the memory.
If an error occurs, the MFC usually will automatically recover the recoverable errors,
such as a memory full condition. If the error does not clear automatically, press
FF/Cont to clear the error and continue the operation.
TestIReset Key _____________________________________ __________________
Test Sample Page
This key is used to print a test sample page. If data remains in the printer memory,
press On/Offljine to turn th© printer offline and press Teet/Reset. The MFC will
print the remaining data first and then will print a test sample page. To print the
printer status lists, see page 118.
If the printer is online, the MFC cannot print a test
sample page.
Resetting the Printer
When Test/Reset is pressed together with Shift, it clears data from the memory. The
printer is also reset and restored to the factory default settings. The Test/Reset
switch may be able to clear an error status and the Hex Dump mode. (See page
120.) Kemember that the Test/Reset switch clears data from the printer memory.
Print Priority Key __________ ___________ ________________ ______________
Wlren this key is first pressed, it puts the MFC exclusively in printer mode. All fax
data will be stored in the memory instead of printing on paper. When this key is
pressed again, and PC data is not being sent or the MFC has completed printing, it
will exit automatically from the print priority status. When the Print Priority key
is pressed, it increases the memory available for printing.
Ill