Brother MFC4550 PLUS - Manual (Page 31)

3. FUNCTION SETTINGS
This chapter is included in both the Setup Manual and this Operations Manual. If you
read the Setup Manual first, you may have completed these function settings already.
There are some settings, such as the date and time, you should set on your MFC
before you begin using it. Once entered, these settings will remain in the MFC until
you change them. You can begin customizing the settings by pressing
Function on the control panel. This activates the function mode and On-Screen
Programming prompts. You can complete a variety of settings in this mode.
Setting the Dialing Mode (TonelPulse) ______________________________________
Your MFC supports both tone (multi-frequency) and pulse (rotary) dialing. It is
initially set to TONE, so you do not have to change the setting if you use that kind of
line. If you are using a pulse dial line, you can change the setting to PULSE by
following the steps below:
KEYS TO PR THE DISPLAY WILL SHOW:
0 1 / 0 1 / 1 9 9 9 0 0 : 0 0
O N L I N E
1, Press Function. ^ E N T E R N 0 . & S E T
2. Wait for two seconds.
^ ^__________ ______ ^__ /
F A X
2. P R I N T E R J
3. Press 1. l . F A X
4. Press 6. 6 . T E L O P T I O N S
5. Press 1.
________________________/
l . T O N E / P U L S E
After two seconds you will be prompted to
select pulse or tone.
' D I A L I N G : T 0 N E
C J
S E L E C T e -> & S E T
6. Press (left arrow) or ► (right arrow)
--- --- --- --^^^^^
D I A L I N G : P U L S E
to find the dialing mode that matches
.
your telephone line.
Example: PULSE.
7. Press Set, ' l . T O N E / P U L S E
8. Press Stop to return to the date and time.
L J
19