Brother MFC4550 PLUS - Manual (Page 21)

Alternating Displays for On-screen Programming (OSP)
SPEAKERrHIGH
C
ALTERNATE
SELECT ^ ^ & SET
When you see alternating displays, the LCD
will usually alternate between the currently
^ selected option, and a help message giving
brief instructions on how to proceed. The
example shows the current speaker volume
is high and prompts you to use (left
arrow) and (right arrow) to change the
setting, and then to press
Set to store it.
Function Selection Table
If you have a basic understanding of how to program your MFC, you can perform most
of the programming settings without this Operations Manual. To help you understand
the function selections, options, and settings that are found in your MFC programs,
we have the following Function Selection Table.
Read through this table to gain a basic understanding of what your new Multi-
Function Center can do, and then the next section will begin instructing you how to
use On-Screen Programming,
<1. FAX MENU FUNCTIONS>
Level one
function
Level two
function
Expianatipn of Options
Factory
setting
Page
1, TIMER
Use TIMER to send your documents at a
later time.
— 42-43
2. POLLING
Polling is the process of retrieving faxes
from another machine. ON/OFP
OFF 89-94
1. TEMP.
3. CALL
RESERVE
You can send a fax and then talk to the
recipient using the CALL RESERVE
function. ON/OFF. OFF 56-57
(TEMPORARY)
SEHINGS
4. CONTRAST
There are three types of contrast settings.
Usually the AUTO setting is acceptable.
But if you want to send or copy an
especially Ught or dark document, you
should change this setting.
AUTO; Default is AUTO. Contrast
setting always reverts to AUTO
after one transmission.
S. LIGHT:To send very Hght documents.
S. DARK: To send very dark documents.
AUTO 36