Brother MFC4550 PLUS - Manual (Page 20)

gSi:
|\^ V^I'^ >J\_'|\1_LIN t i\wv:/l\r\IVIIVIllNVZ7^\^Ory AINU nCLr ^C I
When you enter Function mode, your MFC will display a list of Level One Functions to
choose from (see pages 10 through 14 for these Level One Functions), as seen on the
previous page.
These function options will appear one after the other on the display. You can then choose
one of these options by pressing
Set
when the option you want appears on the LCD.
You can also move through the function menu options at a faster rate by pressing ►
(right arrow). (See page 5 to locate this key on your Control Panel.) When you find the
option you
want, press Set.
After you press the Level One Function number, then press the Level Two Function
number associated with each option (refer to pages 10 through 14),
To exit function mode, press
Stop.
If you selected the wrong menu and want to return
to the previous step, press
Clear.
Shortcut
The functions in this manual list each step in detail, showing the LCD display
prompts
after you
press
each key; Function, 1 (FAX)—
OR
— 2
(PRINTER),
Level
One number, and Level Two number. Then you are in the function where you must
either use the < or > to select an option or enter the information using the dial pad.
To bypass LCD displays and go directly into the function without waiting, do not
pause between the above four key strokes. For example, the shortcut to access the
DATE/TIME function is: Press
Function, 1, 7,1.
Once you are comfortable with sldpping these LCD displays, you can program most
functions directly from the Function Selection Table (see pages 10-14).