Brother MFC4550 PLUS - Manual (Page 25)

Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
7. SETUP
SYSTEM
/. MF LINK
When you use the application software
included into the MFC, you can select if
your FC connected to your MFC will
receive voice and fax messages.
ON/OFF
ON
Seethe
Multi-
Fimction
Link Pro
Online
DoomimtaticD
8 . REMOTE
FAX OPT
1, FAX STORAGE
You can store the incoming fax messages
in the memory. Then you can use the
convenient remote control functions.
ON/OFF
OFF 95-96
?. FAX FWD/
PAGING
You can choose either PAGING, FAX
FORWAKDING or OFF. PAGING ON
will cause the MFC to page you when it
receives a fax message. PAX
FORWARDING ON will cause the MFC
to send any stored faxes that are received
to another predetermined fax number.
OFF/FAX FORWARD/PAGING
OFF 98-100
3. REMOTE
ACCESS
You can register the REMOTE ACCESS
CODE (three digits) allowing you
remotely operate the MFC. (Example;
Retrieving an incoming fax message)
101
4. PRINT FAX
You can print incoming faxes that were
stored in memory.
105
0, INTERRUPT
You can send a fax without canceling the
Timer or Polled Waiting, even if there are
docuiiienLs in the feeder, by “interrupting”
it.
46
<2. PRINTER MENU FUNCTIONS>
Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
1. PRINT
OPTIONS
1. INTERNAL
FONT
You can print resident fonts to check and
confirm font types.
117
2. CONFIGURATION
Printer settings and status are listed
here.
......— 118
2. RESET
PRINTER
1. FACTORY SET
You can restore factory default settings
and temporary settings fur the printer
back to factory default settings.
— 119
2. HEX DUMP
MODE
If you set HEX DUMP MODE, all the PC
data is printed in hexadecimal.
120
13