Brother MFC4550 PLUS - Manual (Page 172)

c
MACHINE ERROR XX
PRESS STOP KEY
:)
Turn off the power. Then contact the Customer
Service number listed on page 181.
MEMORY FULL
N
NO RESPONSE/BUSY
NOT REGISTERED
PRINT OVERRUN
PRINTER JAM
• Press the FF/Cont switch to print the data
remaining in the MFC.
• If you have installed the Windows® driver,
try again after setting the True Type mode
to “Print as Graphics” in the PRINT menu
of your application software.
• Expand the printer memory with the
optional memory board. (MEIOOO or
ME2000)
• Reduce the print resolution or reduce the
complexity of your document.
The number you called does not answer or is
busy. Or, you may have reached a number that
is not mnnected to a fax machine. Check the
number and try again.
The One Touch key or Speed Dial number you
pressed has no number assigned to it. Yon will
have to program a phone number. (See
pages 24-26)
• Press the FF/Cont switch to print the data
remaining in the printer memoiy.
• If you have installed the Windows® printer
driver, try again after setting the TrueType
mode to ‘Print as Graphics’ in the PRINT
menu of your application software.
• If this does not clear the error, reduce the
complexity of your document or reduce the
print resolution.
The recording paper is stuck in the printing
area. Remove the jammed paper. (See pages
146-148.)
s
S E T C A R T R I D G E
1
A toner cartridge is not installed. Reinstall the
toner cartridge.
160