Brother MFC4550 PLUS - Manual (Page 138)

Transmission Verification (Xmit) Report
The Transmission Verification Report can be used as proof that you sent a fax. It lists
the name or fax number of the receiving party, the time and date of transmission, and
whether the transmission was successful. The factory default setting is OFF,
OFF; The report will be printed automatically only if an error occurs during
transmission. If the report says “Result; NG” then send all the pages again. If
the report says “Result: Check readability of transmitted page(s) 02, 05” then
send only pages 2 and 5 again.
ON; A report will be printed automatically. It is important to read the result of each
report to check that the transmission was successful.
THE DISPLAY WILL SHOW;
1. Press Function.
2. Wait for two seceonds.
3. Press 1.
4 . P r e s s 3 .
5. P r e s s 7.
6. Press (left arrow) or (right arrow)
to choose the setting.
Example; ON.
7. Press Set.
8. Press Stop to exit.
0 9 / 1 2 / 1 9 9 8 1 5 : 2 5
O N L I N E
E N T E R N 0 , & S E T
m . F A X
2 . P R I N T E R
1 . T E M P . S E T T I N G S
3 - P R I N T R E P O R T S
7 . X M I T R E P O R T
C
X M I T R E P 0 R T : 0 F F
S E L E C T e ^ & S E T
D
X M I T R E P O R T r O N
7 . X M I T R E P O R T
126