Brother MFC4550 PLUS - Manual (Page 33)

SSI
Setting the Station ID
Tlie Station ID is for identification purposes. Here you can store your name, fax
number, and telephone number. Your MFC prints this information on the electronic
Cover Page and every fax page you send.
• The telephone number that you stored above is used only for the Call Back Message
and the Cover Page features.
• If you do not enter a fax number, no additional information can be entered.
• When you want to enter a space, use (right arrow). You can back up to type over
mistakes by using the (left arrow).
• If Station ID has been programmed, then after Step 5 the name will be displayed
with the prompt “1” to change “2” to exit. Press “1” to change information. Press “2”
to exit from the function.
KEYS!
1. Press Function.
2. Wait for two seconds.
3. Press 1.
4. Press/.
5. Press 4.
You will be prompted to enter your fax
number.
6, Enter your fax number (up to 20 digits).
Example: 4155554444.
7. Press Set.
You will be prompted to enter your
telephone number.
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 8 1 5 : 2 5
O N L I N E
E N T E R N O . & S E T
1 . F A X
/ . S E T U P S Y S T E M
4 . S T A T I 0 N I D
c
F A X :
E N T E R & S E T
F A X : 4 1 5 5 5 5 4 4 4 4 _
C
T E L :
E N T E R & S E T
i [ B . F A X
2 . P R I N T E R
V_______ . -
:)
21